Tmedia™ TSG800 Tsig Signaling SIGTRAN Gateway
The TelcoBridges Tsig TSG800 is a carrier-grade SS7/SIGTRAN gateway. Software upgradeable from 1 to 16 T1/E1, the TSG800 is the most cost-effective SS7/Signaling gateway solution for service providers that are currently available on the market.
Product Characteristics
- 1U Signaling / SIGTRAN Gateway
- 1 to 16 T1/E1
- SIGTRAN, SS7
- Software upgradeable by single T1/E1 increments
- Dual feed redundant power supplies (AC or DC)
- Tmedia 1+1 solution option
PSTN Interfaces
- 1 to 16 T1/E1 (software upgrade)
- Configurable per port for T1 or E1
- RJ48C connectors on the rear of the unit
- Port status LEDs
IP Interfaces
- Up to 6 Ethernet ports 100/1000Base-T
- RJ45 connectors on the rear of the unit
- Up to 16 different IP addresses
- Ethernet port bonding and 802.1q VLAN support
High Availability and Redundancy
- Power supply redundancy
- IP port redundancy
- Self-recovery software
- MTP2/SS7 links redundancy
Tsig 1+1 solution (optional)
The Tsig 1+1 solution extends the high-availability and redundancy features of the TSG800
- SS7/SIGTRAN gateway redundancy (active/standby)
- Full capacity protection (TDM and IP)
- Configuration database redundancy
- Seamless software upgrade
- Fault-tolerant software
- M3UA/MTP3/ISUP redundancy
Tsig 1+1 solution consists of:
- 1 active Tsig unit and 1 standby Tsig unit
- 1 or 2 Tmedia 1+1 Patch Panel(s)
- 1+1 Patch Panels are passive (no power required)
Signaling
Simultaneously supports any combination or all of the following signaling protocols:
SS7
- Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or 2 x HSL
- Multiple redundant MTP2 links
- Up to 64 originating point codes and 256 link sets
- Up to 256 destination point codes
- MTP2 variants: ITU 88, ITU 92, ANSI 88, ANSI 92, NTT, TTC
- MTP3 variants: ANSI, ANSI92, ITU, CHINA
- SCCP routins and global title translation based on called party/calling party global title, SSN and TCAP opcode
SIGTRAN
- M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
- SCTP (raw IP and UDP)
- SS7 termination and/or relay supported\
- Up to 64 M2UA/M2PA links
- Up to 64 M3UA peer server processes
- Transparent SS7 link transport over IP
OAMP+T (Web-based interface)
Operation and Administration
- Configuration, management, and status GUI
- CLI and configuration file machine-to-machine interface
- Configuration change audit logging
- Access, user and privilege management
- SNMP V2, V3 GET, TRAPs (alarms)
- Extensive SNMP call statistics MIBs
Management
- 2 Ethernet ports 100/1000Base-T
- 1 USB Type B serial port
- GUI-based and CLI system upgrade
- GUI-based configuration copy, backup and restore
- Storage for multiple software versions
- Storage for multiple configuration files
- Extensive system status display
Provisioning
- Non-service affecting configuration changes
- Offline configuration validation
- Multiple configuration files archive
- Machine-to-machine configuration interface
Network Analytics (TB Analytics)
- TB Sigtrace - Protocol signaling capture into pcap files
- Media call recording (scriptable for calling and called numbers)
Maintenance
Replaceable fan filters
Dimensions and Weight
- 1U, 19” rackmount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 16” (406 mm) D
- 14 lbs (6.4 kg)
1+1 patch panel (8 T1/E1)
- 1U, 19” rack mount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
- 3.4 lbs (1.6 kg)
Electrical Characteristics (Power Input)
- 90 to 260 VAC, 47 to 63 Hz, -32 to -72 VDC
- Dual feed redundant power supplies (AC or DC)
- Maximum 70W power consumption
Safety
- CAN.CSA C22.2
- EN 60950-1:2005
- EN 60950-1:2006
EMC
FCC Part 15:2013, Subpart B, CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)
Environmental
- Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
- Storage temperature:-10 to +85 °C, 95% rel. hum. non-condensing
- Designed to meet NEBS Level 3
- RoHS compliant
Have more questions about Telcobridges media gateways? Call us at 410-583-1701 or email us at questions@pulsesupply.com.