Tmedia™ TMG800
The TelcoBridges Tmedia TMG800 is our low-density carrier-grade VoIP gateway. Software upgradeable from 1 to 16 T1/E1, the TMG800 is the most cost-effective VoIP gateway solution for service providers that are currently available on the market.
Product Characteristics
- 1U VoIP gateway
- 32 to 512 VoIP channels with universal codecs
- 1 to 16 T1/E1
- SIP, SIGTRAN, SS7 ISUP, ISDN PRI, E1 CAS R2, T1 CAS R1, H.248
- Software upgradeable by single T1/E1 and 32 VoIP channel increments
- Dual feed redundant power supplies (AC or DC)
- Tmedia 1+1 solution option
Capacity and Voice Processing
32 to 512 VoIP channels with universal codecs
PSTN Interfaces
- 1 to 16 T1/E1 (software upgrade)
- Configurable per port for T1 or E1
- RJ48C connectors on the rear of the unit
- Port status LEDs
VoIP Interfaces
- Up to 6 Ethernet ports 100/1000Base-T
- RJ45 connectors on the rear of the unit
- Up to 16 different IP addresses
- Ethernet port bonding and 802.1q VLAN support
Vocoding
Universal codecs: G.711, G.723.1, G.726, G.729ab, T.38 V.17, clear mode (RFC 4040)
Other codecs: G.722, G.722.2 (AMR-WB), G.728, G.729eg, iLBC, AMR, EVRC, GSM FR/EFR, QCELP, T.38 V.34
Fax/Modem/Data
- T.38 fax relay (V.17 and V.34)
- Automatic G.711 fallback, modem and data pass-through
- NSE, VBD support
- Clear mode (RFC 4040)
DTMF relay
- RFC 2833/4733, SIP INFO method, in-band
Echo Cancellation
- G.168 echo cancellation
- 128 ms echo tail on all channels simultaneously
Voice Processing
- Adaptative and programmable jitter buffer (20 to 200 ms)
- Voice activity detection (VAD)
- Comfort noise generation (CNG)
Voice recording and announcement playback
(optional)
Up to 512 optional channels
High Availability and Redundancy
- Power supply redundancy
- IP port redundancy
- Self-recovery software
- MTP2/SS7 links redundancy
Tmedia 1+1 solution (optional)
The Tmedia 1+1 solution extends the high-availability and redundancy features of the TMG800
- VoIP gateway redundancy (active/standby)
- Full capacity protection (TDM and IP)
- Configuration database redundancy
- Seamless software upgrade
- Fault-tolerant software
- M3UA/MTP3/ISUP redundancy
Tmedia 1+1 solution consists of:
- 1 active Tmedia unit and 1 standby Tmedia unit
- 1 or 2 Tmedia 1+1 Patch Panel(s)
- 1+1 Patch Panels are passive (no power required)
Signaling
Simultaneously supports any combination or all of the following signaling protocols:
SIP
- Supported RFCs: 2327, 2833, 2976, 3204, 3261, 3262, 3263, 3264, 3311, 3323, 3325, 3326, 3372, 3389, 3398, 3515, 3551, 3555, 3578, 3581, 3665, 3666, 3764, 3891, 4028, 4694, 4733, 5806
- SIP-I/SIP-T
- Extensive SIP header manipulation
SS7
- Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or 2 x HSL
- Multiple redundant MTP2 links
- Up to 64 originating point codes and 256 link sets
- Up to 256 destination point codes
- ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92, ANSI 95, Q.767, Telcordia 97, ETSIv2, ETSIv3, China, Singapore, UK, SPIROU, Japan NTT, Russia
SIGTRAN
- M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
- SCTP (raw IP and UDP)
- SS7 termination and/or relay supported
- Up to 64 M2UA/M2PA links
- Up to 64 M3UA peer server processes
ISDN PRI
- Q.931 ISDN PRI (user and network side)
- ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro
- ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
- ISDN NFAS
CAS
- MFC R1 (including E&M, loop start, ground start)
- MFC R2 (including standard ITU, Brazil, Mexico, Venezuela)
- Customizable script files to implement any CAS variant
Tctrl (Call Control)
Embedded Call Control
- Call routing based on: trunk group, calling/called numbers (with digit manipulation) and/or various other protocol information/headers.
- Customizable routing including priority-based, load-balancing, blacklisting, call limiting, route retries, and more.
- Customizable call cause code mapping
- Programmable call routing: Access and manipulation of call parameters (SIP, SS7, and ISDN), including Nature of Address (NOA)
- RADIUS authentication and authorization (supports multiple RADIUS servers)
- NPA-NXX routing (over 5 million records)
- SIP-based local number portability and CNAM lookup
H.248 (MEGACO) Call Control
ITU-T H.248 versions 1 and 2
UDP, SCTP, IPSec transport
DTMF and fax detection
Call progress, DTMF and COT tone generation
Call quality and inactivity alerts
H.248 control port redundancy (supports virtual IP)
Session Management and Billing
- SIP peer availability polling
- RTP inactivity monitoring, RTCP
- CDR generation (RADIUS and/or CSV files)
- Integrated lawful intercept (ETSI ES 201 671 v2.1.1)
OAMP+T (Web-based interface)
Operation and Administration
- Configuration, management, and status GUI
- CLI and configuration file machine-to-machine interface
- Configuration change audit logging
- Access, user and privilege management
- SNMP V2, V3 GET, TRAPs (alarms)
- Extensive SNMP call statistics MIBs
Management
- 2 Ethernet ports 100/1000Base-T
- 1 USB Type B serial port
- GUI-based and CLI system upgrade
- GUI-based configuration copy, backup and restore
- Storage for multiple software versions
- Storage for multiple configuration files
- Extensive system status display
Provisioning
- Non-service affecting configuration changes
- Offline configuration validation
- Multiple configuration files archive
- Machine-to-machine configuration interface
Network Analytics (TB Analytics)
- Live call trace with protocol information and ladder diagram
- Live test call with media playback and recording
- TB Sigtrace - Protocol signaling capture into pcap files
- Media call recording (scriptable for calling and called numbers)
Maintenance
Replaceable fan filters
Dimensions and Weight
- 1U, 19” rackmount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 16” (406 mm) D
- 14 lbs (6.4 kg)
1+1 patch panel (8 T1/E1)
- 1U, 19” rack mount
- 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
- 3.4 lbs (1.6 kg)
Electrical Characteristics (Power Input)
- 90 to 260 VAC, 47 to 63 Hz, -32 to -72 VDC
- Dual feed redundant power supplies (AC or DC)
- Maximum 70W power consumption
- Regulatory Compliance (UL/CSA 60950, CSA C22.2)
Safety
- CAN.CSA C22.2
- EN 60950-1:2005
- EN 60950-1:2006
EMC
FCC Part 15:2013, Subpart B, CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)
Environmental
- Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
- Storage temperature:-10 to +85 °C, 95% rel. hum. non-condensing
- Designed to meet NEBS Level 3
- RoHS compliant
Have more questions about Telcobridges media gateways? Call us at 410-583-1701 or email us at questions@pulsesupply.com.